Joannes 201546 solenoid valve coil connection cable for AZ 2.9 – 3-pole

Joannes 201546 is a connection cable used to connect the oil-pump solenoid valve coil to the electrical wiring or control system of an oil burner.

The product is not a solenoid coil and is not a complete solenoid valve. It consists only of a connection cable with a rubber-covered three-pole female connector and three free conductor ends.

The three contacts arranged in a triangular pattern are intended for:

• two electrical supply contacts for the solenoid coil,
• one protective earth connection.

The cable contains three colour-coded conductors:

• brown conductor,
• blue conductor,
• yellow-green protective earth conductor.

The cable must be connected according to the wiring diagram of the burner, oil pump or solenoid coil. Wire colours alone must not be used as the sole basis for determining the correct electrical connection.

Spare-part identification

Burner manufacturer: Joannes
Replacement-part number: 201546
Previous reference: 01069640L
Cable length for version 201546: approximately 350 mm

Joannes part number 201546 is designed for connecting the solenoid valve coil installed on the oil pump. Depending on the burner version, a Danfoss or Suntec oil pump and solenoid coil may be fitted.

Important: The image is for illustration purposes only. The cable shown in the photograph has an angled connector, while the supplied product has a straight connector. The actual product may also differ in cable length, rubber connector-housing shape, colour shade, free wire-end design and connector markings.

The decisive selection criteria are the connector shape and dimensions, triangular three-contact arrangement, cable length and compatibility with the oil-pump solenoid valve coil.

Safety warning

Electrical connection must be carried out by a suitably qualified person. The burner must be disconnected from the electrical power supply before any work is carried out. The burner and solenoid-coil wiring diagram must be followed.

Technical specifications

Burner manufacturer: Joannes
Replacement-part number: 201546
Previous reference: 01069640L
Italian description: Cavo bobina valvola
Product type: solenoid valve coil connection cable
Application: connection of an oil-pump solenoid valve coil
Number of poles: 3
Contact arrangement: triangular
Supplied connector design: straight
Connector type: rubber-covered three-pole female connector
Other cable end: free conductor ends
Number of conductors: 3
Conductor colours: brown, blue and yellow-green
Protective earth conductor: yes
Length of version 201546: approximately 350 mm
Compatible burners: Joannes AZ 2.9, AZ 2.9/L, AZ 2.9 PR and AZ 2.9 PR/L
Sales unit: one piece
Note: the product is not a coil and not a complete solenoid valve
Image: for illustration purposes only; the photograph shows an angled connector, while the supplied product has a straight connector